Add Methods to Replace the Fluorescent Starter in A Windhager Bug Zapper

Methods-to-Replace-the-Fluorescent-Starter-in-A-Windhager-Bug-Zapper.md

@@ -0,0 +1,7 @@
+<br>Fourmilab is surrounded on three sides by farmland. Within the summer, bugs are in all places. Faced with this case, defence in depth is the one possibility: window screens, bats, Odonata on the pond, fly strips on the home windows and swatters in every room,  [Zap Zone Defender USA](https://sijms.org/the-ultimate-guide-to-bug-zappers-zap-zone-defender-and-more/) and because the last level of terminal defence, excessive voltage bug zappers with ultraviolet fluorescent lures. These aren't elegant devices, but they get the job completed. The principle could not be easier-flying insects, whose compound eyes see long-wave ultraviolet mild that mammalian eyes don't, are attracted by the lure tube, which appears to emit a dim blue light to humans. To succeed in the sunshine, they have to fly between wires electrified with between four and eight kilovolts which, when the insect completes the circuit, kill-a-bug. The one downside (at least if you aren't a flying insect) is that they do not seem to last very lengthy. After a bit of a couple of summer, the bulb both starts to flash on and off like a strobe light or just refuses to light in any respect.<br>
+
+<br>Replacement bulbs are readily out there and simple to install, but in my experience, at the least half the time replacing the bulb does not fix the problem. With no mild to draw the insects, a zapper is ineffective, so despite the fact that its excessive voltage subsystem continues to work completely, most people junk it when changing the bulb doesn't make it mild up. I'm way too low-cost to be proud of such a state of affairs, so I determined to open up a failed bug zapper and see what was occurring. The supply of the problem proved to be as simple as I anticipated and as simple to treatment, so within the hope of saving anyone else the trouble of figuring it out, I've scribbled these notes on the way to repair your personal bug zappers. These directions pertain to bug zappers made by the Windhager firm of Salzburg, Austria, who've a dominant market share on this obscure business here in Central Europe.<br>
+
+<br>Obviously, you probably have a bug zapper made by another firm,  [Zap Zone Defender USA](http://123.56.215.97:3000/johnette96l510/7536zap-zone-defender-usa/wiki/Best+Outdoor+Bug+Zappers+in+the+UK) it will look totally different inside and should conceivably use a completely different circuit for the fluorescent lamp. Unless you perceive what you're doing and  [Zap Zone](http://www.mecosys.com/bbs/board.php?bo_table=project_02&wr_id=6060112) know enough electronics to be confident you are not going to do one thing silly, it's best to leave issues properly sufficient alone and get a brand new bug zapper. Further, we're going to be disassembling and modifying a machine which, when opened up,  [Zap Zone Defender USA](https://j2v.co.kr/bbs/board.php?bo_table=qa&wr_id=1021247) has exposed connections to doubtlessly lethal mains current and extremely unpleasant if not deadly high voltage. If you're sufficiently stupid or scatterbrained that you're prone to neglect to tug the mains plug earlier than sticking your hand contained in the guts of a bug zapper, you must stop studying immediately and select some safer undertaking, like making microwave popcorn. To start with, earlier than beginning this process, you should definitely attempt changing the bulb and see if that fixes the problem.<br>
+
+<br>If it does, you've got saved quite a lot of time and, if not, you are going to want a alternative bulb in the end, so why not have one readily available when the time comes? If a brand new bulb would not do the trick, the issue is sort of actually a failed fluorescent starter inside the box, so we'll need to open it up. You probably did remember to unplug the zapper before starting to disassemble it, didn't you? First, take away the bug catcher tray at the bottom of the zapper,  [Zap Zone Defender USA](http://carecall.co.kr/bbs/board.php?bo_table=free&wr_id=1476056) taking care to not spill dead bugs all around the floor or your work area. Depending on the mannequin, the two halves of the body of the bug zapper are fastened along with four or  [Zap Zone Defender USA](https://online-learning-initiative.org/wiki/index.php/The_Newer_Version) six screws. On "industrial" models,  [patio insect zapper](http://yonghengro.gain.tw/viewthread.php?tid=2013214&extra=) these are 2 mm metric machine screws and nuts, but some "consumer" fashions use infernal "split slot" screws which are supposed to maintain you from opening up the device. You see, you are a consumer, so you're expected to eat-buy,  [Zap Zone Defender USA](https://online-learning-initiative.org/wiki/index.php/How_Do_You_Use_A_Bug_Zapper) buy,  [insect elimination](https://humanlove.stream/wiki/User:SandyHeidenreich) purchase, not mend issues which break.<br>